Automotive & Industrial

Automotive & Industrial

ADMM pro 2

The measurement device ADMM 8 pro2 is especially designed for the use of ratiometric sensors and sensors with a power supply voltage up to 30V DC. With its high-precision, galvanically insulated sensor excitation it is not only suited for a wide range of active sensors but also for strain gauge-bridges and sensors with ground-referenced signal inputs.

Specifications
Inputs 8
Measurement ranges ±10, ±20, ±50, ±100, ±200, ±500mV and ±1, ±2, ±5, ±10 ±20, ±60 V
Internal resolution 16 bit
Internal sampling rate per Channel
2 kHz
Measurement data range per channel
1, 2, 5, 10, 50, 100, 500 Hz and 1 kHz, 2 kHz
Input Protection
±100 V permanent, additional ESD protection

SW input filter

Selectable 6th order Butterworth filter, range: 0.1 Hz to 500 Hz
Automatically adjusted to measurement data rate,
alternatively: threshold frequency adjustable per channel

HW input filter

Low-pass filter 3rd order, approx. 500 Hz

Sensor Excitation

±5, ±8, ±10, ±12, ±15 V DC per channel typ. ±30 mA, selectable and adjustable per channel

Accuracy at 25 °C
Temperature Drift

0.05 %
Typ. ±10 ppm/K

Galvanic Isolation

500 V DC

CAN Interface


Configuration

CAN2.0B (active), High Speed (ISO 11898)
125 kBit/s up to max. 1 MBit/s, data transfer is free running

Via CAN bus with CSM Config Tool or CSM INCA AddOn,
All settings and configuration data are stored within module

Sockets:
CAN / power supply
Signal inputs / sensor excitation

LEMO 0B 5-pole
LEMO 0B 6-pole

Power Supply

Approx. 6 V to 50 V DC

Power Consumption

1.8W (without sensor excitation)
Operating temperature -40 ° C to +125 ° C
Dimensions 200 x 40 x 50mm
(Slide Case)
Weight 500 g
Protection Class IP67

Non UK/Ireland Customers

Non UK/Ireland Customers, please contact CSM at: www.csm.de/en/

Product Overview

  • 8 bipolar, galvanically insulated voltage inputs
  • Measurement inputs adjustable per channel from 10mV to 60 V
  • Measurement data rate up to 2 kHz per channel
  • High-precision bipolar, galvanically insulated sensor excitation,
    adjustable per channel
  • Operating temperature: -40° C to +125° C
  • Robust aluminium housing: IP67
  • Extremely compact CAN bus measurement device

ADMM Pro 2 Leaflet
Size: 117.5 KB (120,353 bytes)

Labcell Automotive Instrumentation Brochure
Size: 858.0 KB (878,610 bytes)

Quotation Request

Email us to request a quotation for the ADMM pro 2