Automotive & Industrial

Automotive & Industrial

OUTMM

The OUT MiniModule (OUTMM) generates user-configurable output signals according to predetermined values through CAN bus messages.

The OUTMM 8 was systematically developed for use in vehicles and on the test-bench.

In addition to the Free Running CAN standard version with CSM ConfigTool, a CANopen version according to CiA DS301, DS305 and DS404 is also available.

The eight galvanic isolated output channels are controlled over user-defined CAN Bus messages and offer a high degree of accuracy in all operating modes. Each channel can be configured individually.

Vehicle DBC files can be entered for the configuration and signals directly assigned. With the help of the CSM Generator Software, the OUT-MiniModule can also be used as function generator.

Specifications
Model:
OUTMM 8 OUTMM 8 CANopen
Outputs:
8 Multifunction outputs
Output operating mode
Individually adjustable for each channel:
analog voltage, current output, frequency output,
PWM respectively duty cycle output, digital output
Analog voltage output:
Output range
Output repetition rate
Resolution
Accuracy
3 dB threshold frequency
Output current

0 V to 10 V
1 kHz
approx.14 bit
0.1 % of upper range value
200 Hz
20 mA
Current output:
Output ranges
Output repetition rate
Resolution
Accuracy
3 dB threshold
Valid working resistance

0mA to 20mA / 4mA to 20mA
1 kHz
approx. 14 bit
0.1% of upper range value
200 Hz
0 Ohm to max. 500 Ohm
Frequency output:
Output ranges
Output repetition rate
Level
Duty cycle
Resolution

0 Hz - 100 Hz / 0 Hz - 1 kHz / 0 Hz - 10 kHz / 0 Hz - 100 kHz
1 kHz
Low = 0 V / High adjustable 5 V, 8 V, 10 V, 12 V, 15 V
Adjustable: 0% < duty cycle tImpuls/T < 100% in 1% steps
0.1Hz @100Hz, 0.1Hz @1 kHz, 1Hz @10kHz, 10Hz @100kHz
PWM-/duty cycle output:
Output ranges
Output repetition rate

0% - 100%
1 kHz
Low = 0 V / High adjustable 5 V, 8 V, 10 V, 12 V, 15 V
Fundamental frequency 1 Hz to 100 Hz in 0.1 Hz steps
1 Hz to 1 kHz in 0.1 Hz steps
1 Hz to 10 kHz in 1 Hz steps
1 Hz to 10 kHz in 1 Hz steps
Resolution 0.002% @ 100 Hz
0.01% @ 1 kHz
0.1% @ 10 kHz
0.1%
Digital output:
Level
Output repetition rate
Output current

Low = 0 V / High adjustable 5 V, 8 V, 10 V, 12 V, 15 V
1 kHz
20mA
Galvanic insulation
500 V
CAN interface



Configuration

CAN2.0B (active), High Speed (ISO 11898)
125 kBit/s to max. 1 MBit/s, data transfer free running
via CAN bus with CSM ConfigTool

All settings and configuration data stored in the device
alternatively: configuration and data transfer using CANopen protocol
Power supply
Power consumption
7.5V - 50 V max.
8W
Housing

Protection class
Weight
Dimensions
Aluminium gold anodized (automotive version)
Blue anodized (industrial version)
IP67 (automotive version), IP50 (industrial version) 
500 g
200 x 35 x 50mm / 200 x 40 x 50mm (slide case)
Connectors:
CAN/voltage
Signal/sensor excitation

LEMO 0B 5-pole

LEMO 1B 2-pole
Operating temperature -40 °C to +110 °C (automotive version)
-40° C to +85° C (industrial version)

Non UK/Ireland Customers

Non UK/Ireland Customers, please contact CSM at: www.csm.de/en/

The following operating modes are available:

  • Analog output
  • Current output
  • Frequency output
  • Duty cycle/PWM
  • Digital output

Overview

  • Extremely compact CAN bus measurement output module with 8 completely electrically isolated channels
  • 8 individual configurable output channels
    (analog voltage 0V to 10V, current output 0 to 20mA and 4 to 20mA, frequency and PWM output, digital output)
  • Operating temperature:
    -40° C to +110° C (Automotive Version)
    -40° C to +85° C (Industrial Version)
  • Robust aluminium housing:
    IP67 (Automotive), IP50 (Industrial)
  • For versatile applications and with an
    excellent price-performance ratio

OUTMM Leaflet
Size: 113.2 KB (115,878 bytes)

Labcell Automotive Instrumentation Brochure
Size: 858.0 KB (878,610 bytes)

Quotation Request

Email us to request a quotation for the OUTMM